Copyright (c) 2019 Beijing Jianke Huifeng Technology Co., Ltd
PRODUCTS
Right angle slip ring combination seal JK1—ⅢA
basic information
1. Overview
The right angle slip ring combination seal JK1-ⅢA is composed of a right angle slip ring filled with polytetrafluoroethylene (PTFE) composite material and an O-shaped rubber ring (GB/T3452.1-2005). Used for hydraulic and pneumatic end seals.
2. Working conditions
Working pressure: 0～60MPa
Operating temperature: -55～+250℃ (depending on O-ring material)
Reciprocating speed: -----
Applicable medium: air, water, water-glycol, mineral oil, acid, alkali, etc.
3. Schematic diagram of assembly structure
JK1—ⅢA groove size
|
Groove diameter D(H11) |
Section diameter of O-ring d2 |
Groove width b+0.25 |
Groove depth h+0.1 |
Fillet R |
Round r |
| 15~26 | 2.65 | 4.5 | 2.4 | 0.2~0.4 | 0.1~0.3 |
| 27~50 | 3.55 | 5.6 | 3.2 | 0.4~0.6 | |
| 51~128 | 5.30 | 7.9 | 4.8 | 0.6~0.8 | |
| 129~690 | 7.00 | 10.5 | 6.3 | 0.8~1.2 |
On a
Right angle slip ring combination seal JK1—ⅡB
The next article
Right angle slip ring combination seal JK1-ⅢB