Copyright (c) 2019 Beijing Jianke Huifeng Technology Co., Ltd
PRODUCTS
Right angle slip ring combination seal JK1—ⅡA
1. Overview
The right-angle slip ring combination seal JK1-ⅡA is composed of a right-angle slip ring filled with polytetrafluoroethylene (PTFE) composite material and an O-shaped (GB/T3452.1-2005) rubber ring. It is suitable for high and low speed reciprocating motion and one-way piston (hole) sealing of high-pressure hydraulic system. It is used together with guide ring and support ring. For specifications with a cylinder diameter of less than φ100, open grooves are used as much as possible.
2. Working conditions
Working pressure: 0～60MPa
Operating temperature: -55～+250℃ (depending on O-ring material)
Reciprocating speed: ≤6m/s
Applicable medium: air, water, water-glycol, mineral oil, acid, alkali, etc.
3. Schematic diagram of assembly structure
JK1—ⅡA groove size
|
Cylinder diameter D(H9) |
Groove bottom diameter d(f8) |
Groove width b+0.2 |
Section diameter of O-ring d2 |
Fillet R |
Round r |
Radial clearance S≤ |
Chamfer Z≥ |
| 13~23 | D-5.3 | 4.2 | 2.65 | 0.3~0.4 | 0.1~0.3 | 0.3 | 2 |
| 24~49 | D-6.8 | 5.2 | 3.55 | 0.3~0.4 | 0.4 | 3 | |
| 50~121 | D-10.0 | 7.6 | 5.30 | 0.3~0.5 | 0.3~0.4 | 5 | |
| 122~900 | D-13.0 | 9.6 | 7.00 | 0.4~0.6 | 0.4~0.6 | 7 |